Name: Andover Epoxy
Telephone: +19788007177
Price range: $6–$12 per sq. ft.

Question 1

How much does garage floor coating cost in Andover, MA?

Accepted Answer

Andover Epoxy publishes a planning range of $6–$12 per sq. ft. and $3,000–$5,500 for a typical two-car garage. Actual quotes can vary with square footage, slab condition, crack or spall repair, moisture findings, coating system, decorative broadcast, edge details, and site logistics.

Question 2

Why do quotes vary between projects?

Accepted Answer

Surface preparation, concrete repairs, the coating system, decorative finish choices, layout details, and the condition of the slab can all affect scope and price. Ask for a clear explanation of preparation, materials, repairs, and included work.

Question 3

Is polyaspartic worth more than epoxy?

Accepted Answer

Polyaspartic may be worth considering when UV stability, temperature-change performance, and the system's cure characteristics are priorities. Epoxy can be a practical option for many garages. The better fit depends on the concrete, how the space is used, and the selected system.

Question 4

Does price include surface preparation?

Accepted Answer

Preparation should be discussed as part of a professional coating project, but the exact work depends on the floor. It may involve cleaning, mechanical grinding, crack or surface repair, removal of old coatings, stain treatment, or moisture evaluation.

Question 5

What is the difference between epoxy and polyaspartic?

Accepted Answer

Epoxy is a two-part coating that can create a durable, chemical-resistant surface on properly prepared concrete. Polyaspartic coatings have different cure characteristics and stronger UV stability. Each system has tradeoffs in cost, preparation, appearance, and use conditions.

Question 6

What is a decorative flake finish?

Accepted Answer

A decorative flake finish uses small vinyl flakes broadcast into a wet base coat before a clear topcoat is applied. It creates a speckled, textured appearance and can help make minor dust and day-to-day marks less noticeable.

Question 7

Can a garage floor with an old coating be recoated?

Accepted Answer

Sometimes, depending on the old coating's condition and adhesion. Peeling, failing, poorly bonded, or contaminated material may need removal or mechanical preparation before a new system is applied.

Question 8

What colors and finishes are available?

Accepted Answer

Solid colors and decorative flake blends are common options. Texture, sheen, topcoat, and any traction additive can affect the finished look and how the floor feels underfoot. Reviewing samples can help clarify the options.

Question 9

Does the garage need to be empty before coating?

Accepted Answer

The floor generally needs to be clear of vehicles, storage, equipment, floor mats, and items resting on the concrete so it can be evaluated and prepared. Project-specific instructions should come from the installer.

Question 10

What is diamond grinding and why does it matter?

Accepted Answer

Diamond grinding uses professional equipment to remove weak surface material, old coatings, and contaminants while creating a profile a new coating can bond to. It is one way installers prepare concrete for many garage-floor systems.

Question 11

Can a coating repair structural concrete damage?

Accepted Answer

No. A coating does not cure structural concrete damage. Existing cracks, pitting, spalling, contamination, and moisture conditions should be evaluated before coating so the project scope fits the slab's condition.

Question 12

How long will the project take?

Accepted Answer

Timing varies with the coating system, floor size, concrete condition, preparation needs, weather, and site logistics. Discuss scheduling and when the space can be used again with the installer for the specific project.

Question 13

How do I clean a coated garage floor?

Accepted Answer

Sweep up grit and use water with a mild floor cleaner and a soft mop or brush as needed. Clean up oil, automotive fluids, road salt, and other spills promptly. Avoid harsh acids, bleach, wire brushes, and abrasive pads unless the coating manufacturer recommends a product.

Question 14

Will a coating chip or peel?

Accepted Answer

Chips and scratches can happen from heavy impact or sharp objects. Peeling and delamination can be related to inadequate preparation, moisture, poor adhesion, or a coating system that did not fit the concrete conditions. Proper evaluation and preparation matter.

Question 15

Can a coated floor be repaired?

Accepted Answer

Minor damage may sometimes be spot-repaired, though matching color, texture, and sheen can be difficult. A professional can assess the coating system and the affected area to explain realistic repair options.

Question 16

Do winter conditions affect Andover garage floors?

Accepted Answer

Yes. Road salt, deicing residue, sand, snowmelt, and repeated wet/dry exposure can be tracked into garages during Massachusetts winters. Regular cleanup and an evaluation of the concrete help guide preparation and coating choices.

Question 17

Is moisture a concern in Andover garages?

Accepted Answer

It can be. Seasonal moisture, temperature swings, and moisture moving through a slab can affect adhesion. Damp areas, prior coating failures, visible residue, or other signs of moisture should be evaluated before coating.

Question 18

What areas do you serve?

Accepted Answer

Andover Epoxy serves Andover, North Andover, Lawrence, Methuen, Haverhill, Tewksbury, Wilmington, Boxford, and North Reading.

Garage Floor Coating FAQs

Cost & Pricing

Coating Options

Preparation & Process

Durability & Maintenance

Andover Area Considerations

Still Have Questions?